STEEL & SG IRON FOUNDRY  |   COATINGS  |   ZIRCOTE - 200
 


Print

  PRODUCT BULLETIN

FOUNDRY  

ZIRCOTE - 200

 

A ready mixed flammable coating designed for use in the manufacture of heavy section iron and steel castings.

ZIRCOTE—200 is produced under factory controlled conditions using high quality Zircon as the refractory base.

HOW TO USE

Always remix the coating thoroughly before use especially after prolonged storage or transportation and then check the Baume reading. A mechanical stirrer or a hand plunger may be used. The coating ill be stable for a long period after mixing.

The consistency of the product as supplied is suitable for application by brush or swab but for spraying or dipping it may be diluted as necessary with Grade I Isopropanol.

After application of the coating it should be ignited in order to burn off the solvent. The mould may then be closed and metal can be poured immediately. As an alternative to burning off the solvent, it may be allowed to evaporate over several hours after which the resultant coating layer will be firmly bonded.

A second coat may be applied if required once the first coat is completely Dry.

TYPICAL PHYSICAL PROPERTIES

ZIRCOTE —200 is a white creamy liquid with a pleasant odour.

Density 2.0kg per litre
Baume 80°
Viscosity l5

PACKAGING

Available in 50 litre drums
                 75 litre drums
                 200 litre drums
 


 

Click here to contact us
Email Id :  sundaram1@vsnl.com  , sales@westernmetaflux.com