A ready mixed flammable
coating designed for use in the manufacture of he section
manganese steel castings.
MAGCOTE-31 is produced wider
factory-controlled conditions using high quality calcified magnesite as the refractory base.
HOW TO USE
Always remix the coating
thoroughly before use especially after prolonged storage
or transportation and then check the Baume reading. A
mechanical stirrer or a hand plunger may be used. The
coating will be stable for a long period after mixing.
The consistency of the
product as supplied is suitable for application by brush
or swab but for spraying or dipping it may be diluted as
necessary with Grade I Isopropanol.
After application of the
coating it should be ignited in order to bum off the
solvent. The mould may then be closed and metal can be
poured immediately. As an alternative to burning off the
solvent, it may be allowed to evaporate over several hours
after which the resultant coating layer will be firmly
bonded.
A second coat may be applied
if required once the first coat is completely dry.
TYPICAL PHYSICAL PROPERTIES
MAGCOTE-31
is a white creamy liquid with a pleasant odour
Density |
1.75kg per litre |
Baume |
80° |
Viscosity |
1500 cP |
PACKAGING
Available in
25 litre drums
75 litre drums
200 litre drums |