STEEL & SG IRON FOUNDRY | COATINGS  |   MAGCOTE - 31
 


Print

  PRODUCT BULLETIN

FOUNDRY  

MAGCOTE - 31

 

A ready mixed flammable coating designed for use in the manufacture of he section manganese steel castings.

MAGCOTE-31 is produced wider factory-controlled conditions using high quality calcified magnesite as the refractory base.

HOW TO USE

Always remix the coating thoroughly before use especially after prolonged storage or transportation and then check the Baume reading. A mechanical stirrer or a hand plunger may be used. The coating will be stable for a long period after mixing.

The consistency of the product as supplied is suitable for application by brush or swab but for spraying or dipping it may be diluted as necessary with Grade I Isopropanol.

After application of the coating it should be ignited in order to bum off the solvent. The mould may then be closed and metal can be poured immediately. As an alternative to burning off the solvent, it may be allowed to evaporate over several hours after which the resultant coating layer will be firmly bonded.

A second coat may be applied if required once the first coat is completely dry.

TYPICAL PHYSICAL PROPERTIES

MAGCOTE-31 is a white creamy liquid with a pleasant odour
 

Density 1.75kg per litre
Baume 80
Viscosity 1500 cP

PACKAGING

Available in 25 litre drums
                 75 litre drums
                 200 litre drums
 


 

Click here to contact us
Email Id :  sundaram1@vsnl.com  , sales@westernmetaflux.com